Design
Introduction of WPA3 support required changes in the security configuration method. The new approach is described here:
To improve maintenance, all security need to be aligned to the new schema:
Status:
WiFi security mode | OpenSync 2.4 and before | OpenSync 3.2 and later |
|---|---|---|
Open | Working | Working |
WPA2 Enterprise with remote RADIUS | Working | Working |
WPA2-only | Working | Working |
WPA3-only | None | Working |
Mixed WPA1/WPA2 | Working | Schema ready |
Mixed WPA2/WPA3 | Working | Schema ready |
FT-WPA2-only | Working | Schema ready |
Mixed FT-WPA2/FT-WPA3 | None | Schema ready |
FT-WPA3 | None | Schema ready |
With this ticket, the following security will be supported using new schema:
Mixed WPA1/WPA2
Mixed WPA2/WPA3