OpenSync 6.2 Release Notes
Release 6.2.4
Notable Enhancements
Added descriptions for Wi-Fi health check scripts (ap.sh, bss.sh, etc.)
Improved LAN statistics flow filtering to include entries based on MAC address presence and Ethernet device tags
Notable Fixes
FSM: Replaced assert calls with proper error raising and handling for corrupted signatures.
Resolved outdated IPv4/MAC binding entries by updating the table using MAC addresses instead of IP addresses
WANO: Fixed a memory leak that occurred when a pipeline was restarted and plug-ins (with different WAN configurations) were in the wait queue
OWM:
Improved WPA3 backhaul-only stability by correcting OWM signaling of the PMF state on STA iftype in OVSDB.
Scheduled all driver work tasks when reporting the start of a VIF channel change.
Reduced AP (re)configuration time in OWM by eliminating an unnecessary 5-second timeout.
Fixed a TX statistics regression on Broadcom platforms, introduced during the transition from WM to OWM, where statistics would slowly drift upward on reconnects due to incorrect use of global multicast counters.
Added radio off and interface down wlctl commands for low power mode on Broadcom platforms.
Updated the Dockerfile to fix an unreachable miniupnpc tarball.
Fixed the directory name used for stashing the DPi engine minimum signature bundle.
Interfaces created by third parties are now managed by OpenSync and added to the bridge if needed.
NM: Flushed the FDB table on L2UF receive and improved logging of failures in SFE
Release 6.2.3
New Features
Application QoE framework
Release 6.2.2
Notable Enhancements
IoTM: Added node_id and location_id to IoTM MQTT reports
Notable Fixes
Android: Replaced retired link for OpenSSL download
If a packet already tagged by FSM is seen again, FSM allocates a new buffer and adds the tag information, this is causing memory leak.
Improved the Wi-FI device type that we do not truncate the Associations IEs on Broadcom platforms.
WANO: Fixed a memory leak because we used wrong DHCP IPv4 address in corner cases.
OWM: Fixed 2GHz HWM false-positive backoff preventing low power mode from upsteering clients.
NM: Fix the guest Wi-Fi client can't access internet after the uplink of the leaf reconnects
Release 6.2.1
Notable Fixes
CM: Addressed memory leak when using IPv6 stateful uplink.
CPM: iptables rules are now configured from cloud via NFM, CPM own settings no longer apply.
Remove SIGKILL from list of ignored signals for DM monitoring the process restart.
OWM:
Address memory leaks and corner case crashes.
Decrease log verbosity in module `ow` in section `candidate_assessor` to avoid quick log rotation.
FSM:
Back off packet inspection when the packet buffering is filled.
Fix the configuration of nfqueue kernel flags in runtime.
Reduce the number flow acceleration related frames from the gateway to leaf nodes
Reduced UDP timeout to 30 seconds.
FM: Log duplication is fixed
Platform Support
Fixed survey stats in OWM reporting 1000x greater percentages due to unit computation mismatch (usec vs msec) on Broadcom platforms.
Release 6.2.0
New Features
- Reverse SSH support
- Ookla SpeedTest Multiserver / Multi connection support and IPv6
- Flash Manager
- 3rd Party Service Manager
- CA certificates keystore
- Robustness of WAN configuration (VLAN, PPPoe, ...)
- Advanced Ethernet Client Detection
- Additional enhancements of thermal and fan statistics
- Watchdog Proxy Daemon
- Wi-Fi 7 - MLO - Phase 1.0
To download OpenSync 6.2, go to OpenSync 6.2