Release 3.4.4.0

Notable Fixes

• BM: Fix report 6GHz capability in MQTT

• LTEM: 

  • Send MQTT LTE information regardless of LTE state

  • Don't set WAN state up in northbound API on L3 upstream failure

  • Fix LTE persistence configuration, use secondary uplink during onboarding instead restart managers

• NM: Fixes to mcast-snoop-exceptions by increase schema length and use space as delimiter

• FCM: Fixed mDNS plugin where mDNS were not cached for each unique IP address

• CM: Disable repeating uplink check, when uplink was updated

Notable Enhancements

• LTEM

  • Don't program the APN unless it has changed

  • Add a healthcheck for LTE

  • Reset modem when not connected to a cell

• Amended logpull script to collect outputs of lsof and contents of /proc/sys/fs/file-nr

• Added health-check script to check the available file handles resource pool (observing /proc/sys/fs/file-nr)

• CM: Speed up link switching 

Platform Support

• Prevent use of DFS channels during node onboarding (platform/qca)

• Fix handling of CSA and radar events for QSDK11 (platform/qca)

In Development *

• Band steering algorithm change request (from counters to timer)

* Features which are still in development are disabled by default, and will not be supported in this release.

Release 3.4.3.0 

Notable Fixes

• FSM: 

  • Update checksum for all DNS response packets

  • UDP checksum computation

  • DPI DNS fails to handle response with no answer

  • Added tag flow to pkt_flow that DPI engine makes correct decision

• CM: Fixed switching from LTE to Ethernet when the wired connection is reestablished after reboot

• LTEM: Correctly updates the Lte_State table's persistence status

Notable Enhancements

• FSM

  • Added support to allow for DNS inspection of type 65 packets

  • Improved manager stability

Release 3.4.2.0 

New Features

• Post-association steering busy override

Notable Fixes

• FSM/FCM fixes:

  • Fixed IPv6 mDNS parsing issue by validating the EtherType

  • Fixed originator for lan2lan multicast packets. This corrects the IPv6 flow direction for LAN-to-LAN traffic

  • Fixed directionality in NFQ mode

  • Modified packet verdict for dropped connections to not overwhelm the CPU

• NM:

  • Updated /tmp/resolv.conf permissions to be made readable also by other processes

  • DHCP request option should not re-apply DHCP config

  • Nodes in bridge mode no longer request DHCPv6 prefix delegation

• WM:

  • Listen passively on STA intefraces for L2UF frames

  • Fixed psk-mixed value in the Wifi_VIF_State table under wpa_key_mgmt field when configured as mixed WPA2 or WPA

• CM: 

  • Fix handling of file descriptor in case of /dev/urandom issues

  • Reschedule stability timer only when extender mode

  • Changed order of GRE handling in the bridge when the uplink is lost. First, GRE is removed from bridge. Then, the GRE interface is removed

  • Modified uplink switch algorithm when there are more than two uplinks active

• PM: Fix bridged VLAN services in offline mode

• WANO: 

  • QoS settings are preserved between WAN restarts

  • Enabled NAT on PPPoE and VLAN interfaces during provisioning

• LTEM:

  • Correct LTE status is displayed in OVSDB (enabled or disabled with layer 2 or 3 support)

  • Prevented deadlock situation when the LTE interface cannot connect to a cellular network

Notable Enhancements

• 6Ghz steering using operating class

• Extended WAN type with dhcp to improve visibility and handling (empty option had same operation)

• Logpull includes WAN configuration from persistent storage

• Added default PPPoe options configuration file

• FSM: 

  • Refactored source code to exclusively use the DPI client plugin framework (SNI, DNS and ADT plugins)

  • Added enhancement to the packet inspection engine to stop inspecting packets more efficiently for multicast flows.

• LTEM: MQTT message publishing when the LTE failover is completed

• Extended XM to support DHCP reservation and port forwarding

• kconfig: By default enabled HOSTAP_PSK_FILE_WPS

• Supporting newer OVS versions in LAN stats

Platform Support

• Various QSDK 11.x fixes:

  • Disable HT coexisting on 2.4Ghz STA

  • BSS healthcheck

  • Client statistics

  • CSA offset calculator

  • Unbounded memory write

• Updated QCA and BCM base kconfig multicast default settings

• Forward action frames to user space (platform/qca)

• Added support for Alder and Pine reference board (vendor/qca-template)

• Implicit CSA detection (platform/bcm)

• Fix BSSID info byte ordering (platform/bcm)

Release 3.4.1.0

Notable Fixes

• FSM/FCM fixes:

  • Provided missing ‘policy’ information when Gatekeeper verdict is “ALLOW”

  • Added flow direction to DNS cache

  • Fixed a crash in intf_stats_send_report() if the monitored interface is not available

  • Updates and fixes of unit tests

Notable Enhancements

• Resolved some warnings that are produced by newer compilers (like GCC 10 and Clang 13)

• docker: Enhanced the dock-run script for use with LDAP

Platform Support

• Using ‘mcpctl reload’ instead of restarting mcp when applying changes  (platform/bcm)

• Fixes for Qualcomm 11ax platforms (QSDK 11.x or newer):

  • Applied a missing fix from 11ac code for ht_mode reporting during onboarding, if only STA is present, without an AP (platform/qca)

  • Fixed an issue in the code for obtaining the client list (platform/qca)

In Development *

• PWM (or Public Wi-Fi Manager) - a manager for management of Public AP’s (beta)

• osp_l2uf API for L2UF operations, with libpcap implementation (beta)

• osp_sec API for simple encrypt/decrypt operations, with an openssl implementation (beta)

• LTEM: eSIM support (schema changes only)

* Features which are still in development are disabled by default, and will not be supported in this release.

Release 3.4.0.0

Completed Features

• LTEM (or LTE Manager) – a manager for LTE uplink management, used for dual WAN operation (LTE backup)

• NM: Management of default routes via Wifi_Route_Config

New Features

• NM: Reworked multicast code and APIs (moved from lib/target to OSN)

• WANO: Support for multiple WAN configurations with priorities, to facilitate fallbacks when settings (like VLAN, PPPoE, static IP) are configured remotely

Notable Enhancements

• FSM/FCM:

  • Fixes and adjustments for dual WAN support

  • Revised code related to sockaddr_storage to reduce memory footprint and improve robustness

  • Reworked and enhanced DNS monitoring (separate plugins for DNS, SNI, and ADT)

  • Added support for CNAME-based redirection in Gatekeeper plugin

  • Flow direction is stored in DNS cache

• PM: Persisting configuration of VLAN, multicast, routing, and IPv6 provisioning for offline recovery mode

• healthcheck: Added hostapd and WPA supplicant check (moved from platform/bcm to core and added pings)

• build system: Protobuf code is now generated automatically

• logging: Added support for systemd journal

Platform Support

• Per-VAP airtime management (core, platform/bcm)

• Added a generic implementation of osp_upg API (core), along with platform specific scripts (platform/bcm, platform/qca)

• Fixed incorrect handling of available/allowed channels, which resulted in attempts to use DFS channels during onboarding (core, platform/bcm)

• Support for additional Broadcom chipsets: BCM6715 and BCM6756 (platform/bcm)

• Additional fixes for 6 GHz band (core, platform/qca)

In Development *

• PWM (or Public Wi-Fi Manager) - a manager for management of Public AP’s (beta)

• osp_l2uf API for L2UF operations, with libpcap implementation (beta)

• osp_sec API for simple encrypt/decrypt operations, with an openssl implementation (beta)

• LTEM: eSIM support (schema changes only)

* Features which are still in development are disabled by default, and will not be supported in this release.

To download OpenSync 3.4, go to OpenSync 3.4